2005年1月 2日

[vine-users:069470] Re: はじめまして

小林です。

どこを抜き出したら良いのかわからないので、全て添付します。

/etc/lilo.confの内容は

prompt
timeout=50
default=linux
boot=/dev/hda

map=/boot/map
install=/boot/boot.b
message=/boot/message
lba32

image=/boot/vmlinuz-2.2.25-0vl3
label=linux-2.2-up
read-only
root=/dev/hda3

image=/boot/vmlinuz-2.4.27-0vl7smp
label=linux
initrd=/boot/initrd-2.4.27-0vl7smp.img
read-only
root=/dev/hda3
append=" resume2=swap:/dev/hda5"

image=/boot/vmlinuz-2.4.27-0vl7
label=linux-up
initrd=/boot/initrd-2.4.27-0vl7.img
read-only
root=/dev/hda3
append=" resume2=swap:/dev/hda5"

other=/dev/hda1
optional
label=win

dmesgの内容は

Linux version 2.4.27-0vl7smp (daisuke@xxxxx) (gcc バー
ジョン 3.3.2 20031218 (Vine Linux 3.3.2-0vl8)) #1 SMP 2004年 10月 27日
水曜日 13:21:54 JST
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8c00 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001ffffc00 (ACPI data)
BIOS-e820: 000000001ffffc00 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 HTCLTD ) @ 0x000f6d90
ACPI: RSDT (v001 HTCLTD HTC20B1 0x00000001 PTL 0x00000000) @ 0x1fffa8e5
ACPI: FADT (v001 HTCLTD HTC20B1 0x00000001 PTL 0x00000001) @ 0x1ffffb65
ACPI: BOOT (v001 HTCLTD HTC20B1 0x00000001 PTL 0x00000001) @ 0x1ffffbd9
ACPI: DSDT (v001 HTCLTD HTC20B1 0x00000001 MSFT 0x0100000d) @ 0x00000000
Kernel command line: BOOT_IMAGE=linux ro root=303 resume2=swap:/dev/hda5
Local APIC disabled by BIOS -- reenabling.
Could not enable APIC!
Initializing CPU#0
Detected 597.460 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1192.75 BogoMIPS
Memory: 514032k/524224k available (2065k kernel code, 9804k reserved,
706k data, 160k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.41 (20040107) Richard Gooch (rgooch@xxxxx)
mtrr: detected mtrr type: Intel
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU0: Intel Celeron (Coppermine) stepping 06
per-CPU timeslice cutoff: 365.70 usecs.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
ACPI: Subsystem revision 20040326
PCI: PCI BIOS revision 2.10 entry at 0xfd9ce, last bus=1
PCI: Using configuration type 1
ACPI: IRQ9 SCI: Edge set to Level Trigger.
ACPI-1133: *** Error: Method execution failed [\_SB_.ACAD._STA] (Node
c1613f20), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.ACAD._STA] (Node
c1613f20), AE_NOT_EXIST
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S3 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *11)
ACPI: Embedded Controller [EC] (gpe 9)
ACPI: Power Resource [PFAN] (on)
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 7
PCI: Using ACPI for IRQ routing
Limiting direct PCI/PCI transfers.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Battery Slot [BAT2] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Fan [FAN0] (on)
pty: 256 Unix98 ptys configured
Serial driver version 5.1 (2004-01-29) with MANY_PORTS SHARE_IRQ
SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
PCI: Enabling device 00:0b.1 (0000 -> 0003)
Redundant entry in serial pci_table. Please send the output of
lspci -vv, this message (115d,00d3,8086,2411)
and the manufacturer and name of serial board or modem board
to serial-pci-info@xxxxx
register_serial(): autoconfig failed
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio
hda: HTS548040M9AT00, ATA DISK drive
blk: queue c043b060, I/O limit 4095Mb (mask 0xffffffff)
hdc: MATSHITA CR-271, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 78140160 sectors (40008 MB) w/7877KiB Cache, CHS=4864/255/63, UDMA(33)
hdc: attached ide-cdrom driver.
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
mice: PS/2 mouse device common for all mice
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 111k freed
VFS: Mounted root (ext2 filesystem).
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Trying to move old root to /initrd ... okay
Freeing unused kernel memory: 160k freed
Real Time Clock Driver v1.10f
Adding Swap: 522072k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
PCI: Enabling device 00:0c.0 (0000 -> 0003)
PCI: Setting latency timer of device 00:0c.0 to 64
ymfpci: YMF744 at 0xfe028000 IRQ 7
ymfpci_codec_ready: codec 0 is not ready [0xffff]
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.

以上です。宜しくお願い致します。


投稿者 xml-rpc : 2005年1月 2日 21:35
役に立ちました?:
過去のフィードバック 平均:(0) 総合:(0) 投票回数:(0)
本記事へのTrackback: http://hoop.euqset.org/blog/mt-tb2006.cgi/11295
トラックバック
コメント
コメントする




画像の中に見える文字を入力してください。