2008年2月26日

[plamo:28943] cdrecord BLANK mode

松井と申します.

CD-RW のメディアの内容を消去しよう考えているのですが,cdrecord のblank
オプションで消去できるのでしょうか?

下記を行うとエラー終了してしまいました.

# cdrecord blank=all dev=1,0,0 -vv

...
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x09 Qual 0x01 (tracking servo failure) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 42.783s timeout 9600s
cdrecord: Cannot blank disk, aborting.

その外,
# cdrecord blank=help でのdisk,fast 等も試しましたが消去出来てない模様で
す.

# ちなみにsr_mod は組み込んでいません.:-)

そのときのログを添付いたします.
ご教授頂けましたら幸いです.

松井

----------------------------------------------------------------
# cdrecord blank=all dev=1,0,0 -vv
Cdrecord-ProDVD-ProBD-Clone 2.01.01a37 (i686-pc-linux-gnu) Copyright (C)
1995-2008 Jrg Schilling
TOC Type: 1 = CD-ROM
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.34
Using libscg version 'schily-0.9'.
Using libscg transport code version 'schily-scsi-linux-sg.c-1.92'
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-H62N '
Revision : 'CL00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: CD-RW
Profile: DVD-RAM
Profile: DVD-R sequential recording
Profile: DVD-R/DL sequential recording
Profile: DVD-R/DL layer jump recording
Profile: DVD-RW sequential recording
Profile: DVD-RW restricted overwrite
Profile: DVD+RW
Profile: DVD+R
Profile: DVD+R/DL
Profile: DVD-ROM
Profile: CD-R
Profile: CD-RW (current)
Profile: CD-ROM (current)
Profile: Removable Disk
Feature: 'Profile List' (current) (persistent)
Feature: 'Core' (current) (persistent)
Feature: 'Morphing' (current) (persistent)
Feature: 'Removable Medium' (current) (persistent)
Feature: 'Write Protect'
Feature: 'Random Readable'
Feature: 'Multi Read'
Feature: 'CD Read' (current)
Feature: 'DVD Read'
Feature: 'Random Writable'
Feature: 'Incremental Streaming Writable'
Feature: 'Formattable' (current)
Feature: 'Defect Management'
Feature: 'Restricted Overwrite'
Feature: 'DVD+RW'
Feature: 'DVD+R'
Feature: 'Rigid Restricted Overwrite'
Feature: 'CD Track at Once'
Feature: 'CD Mastering' (current)
Feature: 'DVD-R/-RW Write'
Feature: 'Layer Jump Recording'
Feature: 'CD-RW Write' (current) (persistent)
Feature: 'DVD+R/DL Read'
Feature: 'Power Management' (current) (persistent)
Feature: 'S.M.A.R.T.'
Feature: 'CD Audio analog play'
Feature: 'Microcode Upgrade'
Feature: 'Time-out' (current) (persistent)
Feature: 'DVD-CSS'
Feature: 'Real Time Streaming'
Feature: 'Logical Unit Serial Number' (current) (persistent) Serial:
'K5179QN0651 '
Feature: 'Disk Control Blocks'
Feature: 'DVD CPRM'
Feature: 'Microcode Information' (current) (persistent)
Supported CD-RW media types: 0F
Drive current speed: 4
Drive default speed: 4
Drive max speed : 4
Selected speed : 4
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
RAW/R96R LAYER_JUMP
Drive buf size : 1053696 = 1029 KB
Drive pbuf size: 1966080 = 1920 KB
01 00 00 01 00 00 00 00
01 AA 01 01 00 00 00 00
Track 1 start -150
01 00 A0 00 00 00 00 01 00 00 00 00
01 00 A1 00 00 00 00 00 00 00 00 00
01 00 A2 00 00 00 00 00 00 00 00 00
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Reference speed: 2
Disk Is not unrestricted
Disk Is erasable
ATIP start of lead in: -11940 (97:22/60)
ATIP start of lead out: 335975 (74:41/50)
1T speed low: 0 (reserved val 0) 1T speed high: 4
2T speed low: 0 (reserved val 5) 2T speed high: 0 (reserved val 10)
power mult factor: 3 5
recommended erase/write power: 2
A1 values: 02 3A A0
A2 values: 5A A6 14
Disk type: Phase change
Manuf. index: 43
Manufacturer: Acer Media Technology, Inc.

Capacity Blklen/Sparesz. Format-type Type
0 2048 0x00 No Media Present or Unknown
Capacity
Starting to write CD/DVD/BD at speed 4 in real BLANK mode for single
session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Performing OPC...
Blanking entire disk
cdrecord: Input/output error. blank unit: scsi sendcmd: no error
CDB: A1 00 00 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 0A 34 14 04 90 09 01 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x09 Qual 0x01 (tracking servo failure) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 42.783s timeout 9600s
cdrecord: Cannot blank disk, aborting.

投稿者 xml-rpc : 2008年2月26日 17:48
役に立ちました?:
過去のフィードバック 平均:(0) 総合:(0) 投票回数:(0)
本記事へのTrackback: http://hoop.euqset.org/blog/mt-tb2006.cgi/70369
トラックバック
コメント
コメントする




画像の中に見える文字を入力してください。