2008年2月18日

[plamo:28914] Re: cdrecord(ATAPI)


こんにちは Plamo大好 さん,

詳細な調査頂きましてありがとうございます.参考になりました.

お送り頂きましたログと私のログを比較してみましたら,私の環境では,下記の
エラーが起こっていることが分かりました.これが原因かどうかは分かりません
が.


cdrecord: Input/output error. write_g1: scsi sendcmd: no error

同一H/W環境で,Fedora7 のCD-ROM作成ツール(Nautilas 2.18.1)では同一
CD-ROMへの書き込みが出来ています.このツールでも最終的にcdrecord を呼ん
でいるのでは無いかと思ったのですが...

------------------------------------------------------------------
# cdrecord -vvv dev=/dev/sr0 speed=32 -eject -data plamo-4.22_02.iso
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.9'.
Using libscg transport code version 'schily-scsi-linux-sg.c-1.92'
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-H62N '
Revision : 'CL00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: CD-R
Profile: DVD-RAM
Profile: DVD-R sequential recording
Profile: DVD-R/DL sequential recording
Profile: DVD-R/DL layer jump recording
Profile: DVD-RW sequential recording
Profile: DVD-RW restricted overwrite
Profile: DVD+RW
Profile: DVD+R
Profile: DVD+R/DL
Profile: DVD-ROM
Profile: CD-R (current)
Profile: CD-RW
Profile: CD-ROM
Profile: Removable Disk
Feature: 'Profile List' (current) (persistent)
Feature: 'Core' (current) (persistent)
Feature: 'Morphing' (current) (persistent)
Feature: 'Removable Medium' (current) (persistent)
Feature: 'Write Protect'
Feature: 'Random Readable'
Feature: 'Multi Read'
Feature: 'CD Read'
Feature: 'DVD Read'
Feature: 'Random Writable'
Feature: 'Incremental Streaming Writable' (current)
Feature: 'Formattable'
Feature: 'Defect Management'
Feature: 'Restricted Overwrite'
Feature: 'DVD+RW'
Feature: 'DVD+R'
Feature: 'Rigid Restricted Overwrite'
Feature: 'CD Track at Once' (current)
Feature: 'CD Mastering' (current)
Feature: 'DVD-R/-RW Write'
Feature: 'Layer Jump Recording'
Feature: 'CD-RW Write' (current) (persistent)
Feature: 'DVD+R/DL Read'
Feature: 'Power Management' (current) (persistent)
Feature: 'S.M.A.R.T.'
Feature: 'CD Audio analog play'
Feature: 'Microcode Upgrade'
Feature: 'Time-out' (current) (persistent)
Feature: 'DVD-CSS'
Feature: 'Real Time Streaming'
Feature: 'Logical Unit Serial Number' (current) (persistent) Serial:
'K5179QN0651 '
Feature: 'Disk Control Blocks'
Feature: 'DVD CPRM'
Feature: 'Microcode Information' (current) (persistent)
Supported CD-RW media types: 0F
Drive current speed: 48
Drive default speed: 48
Drive max speed : 48
Selected speed : 32
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
RAW/R96R LAYER_JUMP
Drive buf size : 1053696 = 1029 KB
Drive pbuf size: 1966080 = 1920 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 579 MB
track: 1 start: 0 pregap: 150
Total size: 665 MB (65:56.64) = 296748 sectors
Lout start: 665 MB (65:58/48) = 296748 sectors
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 AA 01 14 00 41 3A 30
Track 1 start 0
Track 2 start 296748
41 00 A0 00 00 00 00 01 00 00 00 00
41 00 A1 00 00 00 00 01 00 00 00 00
41 00 A2 00 00 00 00 65 58 48 00 00
41 00 01 00 00 00 00 00 02 00 00 00
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Disk Is not unrestricted
Disk Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11634 (97:26/66)
ATIP start of lead out: 359846 (79:59/71)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation

Capacity Blklen/Sparesz. Format-type Type
0 2048 0x00 No Media Present or Unknown
Capacity
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 63098
Starting to write CD/DVD/BD at speed 32 in real SAO mode for single
session.

Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Performing OPC...
Sending CUE sheet...
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 AA 01 14 00 41 3A 30
cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150

************************* Error ****************************
cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 FF FF FF 6A 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 2A 00 00 80 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format)
Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.002s timeout 200s
write track pad data: error after 0 bytes
BFree: 1029 K BSize: 1029 K
Starting new track at sector: 0
Track 01: 0 of 579 MB written.cdrecord: Input/output
error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 2A 00 00 80 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format)
Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.002s timeout 200s

write track data: error after 0 bytes
cdrecord: A write error occured.
cdrecord: Please properly read the error message above.
Writing time: 24.436s
Average write speed 162.2x.
Fixating...
Fixating time: 0.005s
cdrecord: fifo had 64 puts and 1 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.

投稿者 xml-rpc : 2008年2月18日 14:36
役に立ちました?:
過去のフィードバック 平均:(0) 総合:(0) 投票回数:(0)
本記事へのTrackback: http://hoop.euqset.org/blog/mt-tb2006.cgi/69929
トラックバック
コメント
コメントする




画像の中に見える文字を入力してください。