2008年2月14日

[plamo:28900] cdrecord(ATAPI)

松井と申します.

plamo 4.22 を使用しております.

cdrecord(Cdrecord-Clone 2.01) でSATA 接続のDVDRAM(HL-DT-ST DVDRAM
GSA-H62N) を使用してCD-ROM を焼こうとすると,

write track data: error after 2412544 bytes

cdrecord: The current problem looks like a buffer underrun.
cdrecord: Try to use 'driveropts=burnfree'.
cdrecord: Make sure that you are root, enable DMA and check your HW/OS
set up.

というエラーが起こってしまいます.cdrecord のログ中に,

Warning: There is absolutely NO DMA, operations thus are slow.

が表示されてますのでDMAが有効になっていないようにも思われます.

bios を確認してみましたところ,
DMA mode: auto
Async DMA: Multiword DMA-2
Ultra DMA: Ultra DMA-5
となっています.

下記のメッセージ(^^^^^^^^部)も気になります.DMA をサポートしているように
も見受けられます?

cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support
code. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
cdrecord: If you need DVD-R/DVD-RW support, ask the Author for
cdrecord-ProDVD.
cdrecord: Free test versions and free keys for personal use are at
ftp://ftp.berlios.de/pub/cdrecord/ProDVD/
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 16209 kB/s 92x CD 11x DVD
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

何か設定等に不備があるのでしょうか.ご教授頂けましたら幸いです.

----------------------------------------------------------
:ログ

# cdrecord dev=ATAPI -scanbus
Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jrg
Schilling
cdrecord: Warning: Running on Linux-2.6.22.9-plamoSMP
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or
Solaris.
scsidev: 'ATAPI'
devname: 'ATAPI'
scsibus: -2 target: -2 lun: -2
Warning: Using ATA Packet interface.
Warning: The related Linux kernel interface code seems to be
unmaintained.
Warning: There is absolutely NO DMA, operations thus are slow.
Using libscg version 'schily-0.8'.
scsibus0:
0,0,0 0) 'HL-DT-ST' 'DVDRAM GSA-H62N ' 'CL00' Removable
CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *

----------------------------

# cdrecord dev=ATAPI:0,0,0 -v speed=2 -data plamo-4.22_02.iso
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent
defaults.
cdrecord: Continuing in 5 seconds...
Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jrg
Schilling
cdrecord: Warning: Running on Linux-2.6.22.9-plamoSMP
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or
Solaris.
TOC Type: 1 = CD-ROM
scsidev: 'ATAPI:0,0,0'
devname: 'ATAPI'
scsibus: 0 target: 0 lun: 0
Warning: Using ATA Packet interface.
Warning: The related Linux kernel interface code seems to be
unmaintained.
(**************************** Warning ****************************)
Warning: There is absolutely NO DMA, operations thus are slow.
Using libscg version 'schily-0.8'.
SCSI buffer size: 64512
atapi: 0
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-H62N '
Revision : 'CL00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009
Profile: 0x0012
Profile: 0x0011
Profile: 0x0015
Profile: 0x0016
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A
Profile: 0x001B
Profile: 0x002B
Profile: 0x0010
Profile: 0x0009 (current)
Profile: 0x000A
Profile: 0x0008
Profile: 0x0002
cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support
code.
cdrecord: If you need DVD-R/DVD-RW support, ask the Author for
cdrecord-ProDVD.
cdrecord: Free test versions and free keys for personal use are at
ftp://ftp.berlios.de/pub/cdrecord/ProDVD/
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 16209 kB/s 92x CD 11x DVD
FIFO size : 4194304 = 4096 KB
Track 01: data 579 MB
Total size: 665 MB (65:56.66) = 296750 sectors
Lout start: 665 MB (65:58/50) = 296750 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11634 (97:26/66)
ATIP start of lead out: 359846 (79:59/71)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 63096
Starting to write CD/DVD at speed 4 in real TAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Performing OPC...
Starting new track at sector: 0
Track 01: 2 of 579 MB written (fifo 100%) [buf 99%]
4.1x.cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 04 9A 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 2A 30 02 80 21 02 00 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 40s

(**************************** Error ****************************)
write track data: error after 2412544 bytes
cdrecord: The current problem looks like a buffer underrun.
cdrecord: Try to use 'driveropts=burnfree'.
cdrecord: Make sure that you are root, enable DMA and check your HW/OS
set up.
Writing time: 15.499s
Average write speed 256.0x.
Min drive buffer fill was 99%
Fixating...
Fixating time: 66.603s
cdrecord: fifo had 102 puts and 39 gets.
cdrecord: fifo was 0 times empty and 26 times full, min fill was 85%.
bash-3.2#

投稿者 xml-rpc : 2008年2月14日 13:49
役に立ちました?:
過去のフィードバック 平均:(0) 総合:(0) 投票回数:(0)
本記事へのTrackback: http://hoop.euqset.org/blog/mt-tb2006.cgi/69764
トラックバック
コメント
コメントする




画像の中に見える文字を入力してください。